Shoe GOO Adhesive – RacingThePlanet Limited

Put your favorite footwear back on your feet In 1972 Shoe GOO was invented for "tennis toe" (caused by dragging your shoe toe during service). The formula remains the same after all these years not only do tennis players continue to use Shoe GOO, it has become very popular with skateboards and anyone not wanting to let go of those special shoes in the closet. This clear, rubbery adhesive was easily applied to shoes and hardens overnight restoring worn tennis shoes into "new" useable shoes again. ADVANTAGES: Waterproofing: Shoe GOO is water resistant immediately upon application. Apply Shoe GOO directly to the surface to be sealed. Use thin coats of Shoe GOO to build a thick coating on the surface to be sealed, allowing each layer to set 3 to 4 hours. This is especially ideal for smooth surfaces, such

Put your favorite footwear back on your feet

In 1972 Shoe GOO was invented for tennis toe (caused by dragging your shoe toe during service).

The formula remains the same after all these years not only do tennis players continue to use Shoe GOO, it has become very popular with skateboards and anyone not wanting to let go of those special shoes in the closet.

This clear, rubbery adhesive was easily applied to shoes and hardens overnight restoring worn tennis shoes into new useable shoes again.

ADVANTAGES:

• Waterproofing: Shoe GOO is water resistant immediately upon application. Apply Shoe GOO directly to the surface to be sealed. Use thin coats of Shoe GOO to build a thick coating on the surface to be sealed, allowing each layer to set 3 to 4 hours. This is especially ideal for smooth surfaces, such as plastic, glass or ceramic. Shoe GOO hardens by solvent evaporation, so allow time for thorough hardening to ensure proper bonding and wear resistance.
• Repairing worn soles: If a worn shoe has a hole that goes all the way through the sole, tape over the hole inside the shoe before applying Shoe GOO to the outer sole. This will help avoid creating a bump. The tape should be removed from the inside and all bumps smoothed out within 2 hours, before the glue is completely hard.
• Fishing and foul weather gear: Some fisherman's waders and foul weather gear have a water-repellent coating that must be removed before Shoe GOO will adhere. Scrub the area with detergent and allow to dry. Roughen surface before applying Shoe GOO. If the bond still pulls apart, the repair must be done on the inside surface of the item, which is usually reinforced with fabric.

Use Shoe GOO to:

• Rebuild your worn-out soles overnight.
• Seal rubber boots, galoshes, and waders.
• Coat and protect shoes to avoid premature wear.
• Repair damaged heels.
• Secure loose insoles.
• Reinforce skate shoes.
• Coat skateboards for extra traction.

NOTE: SHOE GOO may damage finished surfaces. Avoid such contact until SHOE GOO is completely dry.

Remark: Keep out of reach of children

Boot-Fix Shoe Glue: Instant Professional Grade Shoe India, 53% OFF

Boot-Fix Shoe Glue: Instant Professional Grade Shoe India, 53% OFF

Shoe GOO is the #1 shoe repair adhesive! Its ideal for fixing worn soles or damaged heels, coating shoes to prevent premature wear and sealing galoshes, waders or rubber boots. The unique formula is designed for strong abrasion resistance and better adhesion to flexible materials. Creates extra traction can even be used on skateboards! Rebuild, Protect, Repair. Shoe Goo is a superior adhesive and sealant that repairs all types of footwear easily and permanently.

Shoe Goo Adhesive, 3.7 fl oz (6 Pack, Clear)

Shoe GOO 110212 Adhesive, 3.7 fl oz, Black : Industrial & Scientific

Shoe Goo (Original) - Clear – The Insole Store

I've heard of the shoe goo and drywall tape. I've tried gorilla tape and hockey tape. Gonna try some Flex Seal, it should help the body from getting bent and cracking. Hopefully

Shoe GOO® Adhesive, 3.7 fl oz (6 Pack, Clear) : Industrial & Scientific

SHOE GOO シューグー SPORTS GOO クリア - スポーツ/アウトドア その他

Shoe Goo

Shoe Goo Original 109.4ml - Boarder Labs + CalStreets