3D Puff HTV Puff Heat Transfer Vinyl Starcraft Heat Transfer Vinyl

4.7

(455)

Write Review

$ 2.00

Add to Cart

Qty

In stock

Description

This Craft Supplies & Tools item by AquariusInk has 26 favorites from shoppers. Ships from Orlando, FL. Listed on 27 Oct, 2023
StarCraft 3D Puff is a perfect material to give a 3D effect to any design. Applies to: Cotton, Polyester, Cotton/Polyester Blends. Not suitable for us on nylon and other coated textiles. Finish: Matte/Flat/Dimensional Carrier: Polyester Application Instructions: Time: 10-12 Seconds Pressure: Medium to firm pressure Peel: Warm 2nd Press: To maximize the 3D effect, remove protective (carrier, Parchment or non-stick sheet) and press a second time directly against the heat platen. Temperature: 285°F Time: 5-7 seconds Pressure: Medium to firm pressure *** Hang to dry is recommended to increase the longevity of the garment and heat transfer vinyl. Drying with heat may also shrink the garment and cause puckering of the heat transfer vinyl so caution is advised. Care/Wash Instructions Wait 24 hours before washing. No harsh detergents or bleach. Tumble dry low heat. *** It is the nature of this product for Puff results and texture to vary. It is a good idea to perform a test swatch. Do not stretch 3D StarCraft PUFF as it is susceptible to cracks when stretched. ♒Due to the manufacturing process, material may vary an 1/8"-1/4" ♒ ♒ Our Guarantee ♒ Our products are guaranteed to be free of MAJOR and CRITICAL DEFFECTS Only. Due to the nature of our products and the variables of usage, cleaning, construction, wearing, and storage etc. we cannot guarantee how our products will hold up under conditions not in our control. If you have concerns, it is best to order a small sheet/amount to test if it will meet your needs. All technical information and recommendations are based on reliable testing, meant to be used as general guidelines. The purchaser assumes all liability and risk in connection with the use of our products.