Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles

Deck Grip is a UV and Chemical Resistant non-slip coating perfect for use around swimming pool areas and concrete or tiled patios to help prevent slips and falls on floors when wet
DESCRIPTION Deck Grip is an anti-slip sealer for concrete and other stone surfaces. This versatile non-slip coating is non-yellowing, water-based acrylic and is easy to apply. Deck Grip non-slip concrete results in a clear, semi-gloss and barefoot-friendly finish that is chemical resistant, UV resistant and highly durable. Deck Grip is the perfect anti-slip solution to treat slippery pool decks, and all types of stamped (sealed or unsealed) concrete decks.  Compatible on virtually all types of natural stone surfaces where anti-slip sealers are desired. Deck Grip Roller - Click here to buy more Sealed Stamped Concrete - Deck Grip will work great on top of all sealers and is chemical and chlorine resistant.  Ideas for surfaces surrounding pools and spas.  Please start with a clean dry surface prior to application.  Allow 24 hours to cure.  Apply 2 thin coats for best durability and slip resistance.  NOTE:  Some textured surfaces require 3 coats for best traction. Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards. 0.52 Wet DCOF - ANSI B101.30.53 Wet DCOF – ANSI A137.1 / A326.30.62 Wet SCOF - ANSI B101.1 Installation Instructions (TDS) Safety Data Sheet (SDS) PRODUCT FEATURES Great for bare feet Use it on pool decks and sealed concrete One 3/8” nap roller included per gallon Deck Grip is available in 1 gallon and 5-gallon pails Can be used indoors or outdoors It dries clear with a semi-gloss finish and is easy to apply One gallon covers 300 – 600 square feet Roller Included (Click here to buy more) SPECIFICATIONS Gallon 5-Gallon Coverage per Sq Ft 300-600 Appx 2,500 Cost per Sq Ft (Appx.) $0.25 $0.23 ⅜” Nap Rollers Included 1 5 Volume (liters) 3.78 18.92 INSTRUCTIONS Safety Precautions: • Use in a well-ventilated area. • If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Hotline at 1-800-424-LEAD or www.epa.gov/leadfor more information. Optional Safety Equipment: • Chemical-resistant gloves • Eye protection • Mask Surface Preparation: • Surface preparation varies by surface. Please see the chart below for specific surface preparation instructions. Application Instructions: Step 1: Mixing Additive: The quantity of SlipDoctors Deck Grip Additive to be used depends on the level of slip resistance desired(see chart below). The maximum texture is recommended for the most effective anti-slip protection. Pour the desired amount of Additive into the Deck Grip container and gently mix to ensure even distribution. Avoid shaking to prevent foaming. Mix occasionally during application. Step 2: TEST: Deck Grip should be tested on a small inconspicuous area before full application Step 3: Deck Grip can be rolled or sprayed, rolling is recommended. Roll: Use the included 3/8” nap roller to evenly coat the surface. Avoid puddling in low areas. If puddles occur, roll them out. Two thin coats are recommended rather than one thick coat. Spray: Spray using a 5916 nozzle that produces a flow of 1/10 of one gallon per minute. Spray in a fine fog pattern without spurts or dribbles to form a thin continuous film. Avoid puddling in low areas. If puddles occur, roll them out. Step 4: For added protection, greater performance, and durability, we recommend applying Deck Gripin in two thin coats. Allow the first coat to dry for 2-4 hours before applying the second coat. The second coat should be applied at a right angle to the first coat. Step 5: Clean-up: While Deck Gripis still wet, equipment may be cleaned with soap and water. Once dried, equipment may be cleaned with a solvent, such as xylene or toluene. Maintenance: For general cleaning and maintenance, use a light pressure rinsing. For best results to remove oily deposits or other foreign matter, apply pH-neutral cleaner recommended dilution rate and scrub lightly with a soft bristle deck brush.Do not use alcohol-based cleaners, such as pine-sol.

SlipDoctor's GripX Non-Slip Coating and Sealant for Indoor and Outdoor Tiles, Concrete and Natural Stone - Clear Anti-Slip for Slip Resistant Flooring: : Tools & Home Improvement

Deck Grip - Clear Indoor & Outdoor Non-Slip Sealer for Concrete

GripX Non-Slip Sealer and Coating for Concrete and Stone

SLIP DOCTORS Deck Grip 1 gal. Clear Semi-Gloss Waterbased Non-Slip Exterior/Interior Concrete Sealer for Slippery Surfaces S-CT-DECKGRP1G - The Home Depot

Notice Please Wash Your Hands Sign SIGN-724 Barco Products, 43% OFF

SlipDoctors Deck Grip Clear Semi-gloss Interior/Exterior Anti-skid Porch and Floor Paint (1-Gallon) in the Porch & Floor Paint department at

SlipDoctor's GripX Non-Slip Coating and Sealant for Indoor and Outdoor Tiles, Concrete and Natural Stone - Clear Anti-Slip for Slip Resistant Flooring: : Tools & Home Improvement

DECK-O-GRIP - Acrylic, Slip-Resistant Concrete Deck Sealer - Deck-O-Seal

SlipDoctor's GripX Non-Slip Coating and Sealant for Indoor and Outdoor Tiles, Concrete and Natural Stone - Clear Anti-Slip for Slip Resistant Flooring: : Tools & Home Improvement

Notice Please Wash Your Hands Sign SIGN-724 Barco Products, 43% OFF

SlipDoctor's GripX Non-Slip Coating and Sealant for Indoor and Outdoor Tiles, Concrete and Natural Stone - Clear Anti-Slip for Slip Resistant Flooring: : Tools & Home Improvement

Fine Grit, Clear Anti Slip Paint Additive Floor Grip for Acrylic Sealers & Paints, 4 oz. for 1 Gallon - Non Skid Paint Additive Creates Strong Slip Resistant Surface & Adds